The operation is a pre-priming operation before applying the final coating waterborne paints, decorative plasters and other polymeric materials, water dispersion. At Depending on the destination of primers, their characteristics and properties defined range of technological problems to be solved when the finishing operations. Therefore, priming materials should be used in strict accordance with the attached technical instructions. If you have problems and questions should contact the firm to the supplier for more technical information. What benefits does the use of primers? Some people believe that the use of primers reduces the subsequent material. However, application of primer material has little effect on reducing consumption. At the same time, priming, in most cases is technologically important and necessary for the operation of predetermined characteristics of the final coating.
Primers form with subsequent finishing materials common finishing systems and provides consistent quality finishes. For example primer CS-04 to be coated enamel XC-710 General Properties of primers: Actually primer has good adhesion to all surfaces recommended. After drying, primers do not form an insulating film. The resulting primer is durable, provides good adhesion with subsequent finishing materials, and form with them on a consistent chemical and physical properties of the system. Primers have hydrophobic properties, align the absorbency of the base, which ensures uniform application of subsequent materials. Next to each type of primers are application features and performance characteristics.
Primers form with subsequent finishing materials common finishing systems and provides consistent quality finishes. For example primer CS-04 to be coated enamel XC-710 General Properties of primers: Actually primer has good adhesion to all surfaces recommended. After drying, primers do not form an insulating film. The resulting primer is durable, provides good adhesion with subsequent finishing materials, and form with them on a consistent chemical and physical properties of the system. Primers have hydrophobic properties, align the absorbency of the base, which ensures uniform application of subsequent materials. Next to each type of primers are application features and performance characteristics.
Posted by: |